Steps to Make Slush

1. Clean all components and assemble the machine.
2. Prepare slushy ingredients and mixed thoroughly. Pour ingredients into the container and secure the lid tightly.
3. Plug in the power cord and select the function and density settings based on the ingredients.
Step 1: Choose the appropriate slushy function from the available options.
Step 2: Use the “+” and “-” buttons to adjust the slushy density to your preference.
Step 3: Press the start button to begin making the slushy.
4. After completion, the machine enters a keep-warm state, and the display shows “COOL”.
5. Maintain the “COOL” status, then rotate the handle to remove the slushy.
6. After enjoying the slushy, press the power button, unplug the power cord, and clean all components.
7. Once all parts are thoroughly cleaned and dried, reassemble them into the machine's main unit.

Notes:
1. Before first use,allow the machine to rest upright on a flat 2 hours.
2. lf the liquid level becomes low after serving, add more of the same bever-age directly.

Get the Recipes

Control Panel

1.Touch the desired beverage function mode.Use the "+"and "-" buttons to adjust the settings to your prference.
2.Once set, press the "Start/Pause" button to begin the drink preparation cycle.
3.You may press "Start/Pause" during operation to switch functions or readjust settings.
4.The current setting is indicated by a lit indicator light during the process.

Slush Recipe Sharing

Accessories

The package contains the main unit (with cooling bucket), transparent filling bucket (with matching lid), mixing paddle (with sealing ring), and water tank. Additionally, it includes a drip tray with lid, and clear installation guide to help you make slush.

Shop Now

Assembly Instructions

  • Step 1

    Clean the ingredient bucket assembly, bucket seal.mixing blade, drip tray, and drip tray cover.

  • Step 2

    Ensure the bucket seal is correctly reinstalled,Then, align the drip tray with the slot on the base plate and slide it into place.

  • Step 3

    Place the mixing blade over the freezing cylinder shaft, aligning it with the notch, push down until it locks into position.

  • Step 4

    Align the cleaned ingredient bucket assemblywith the guide slots on the base plate and slide it in until fully seated

  • Step 5

    Place the quick-lock handle over the lug on the bucket assembly and press it down firmly until it locks into position.

  • Step 6

    Insert the drip tray cover into the bottom of the machine until it clicks into place.